User Manual

AFL-F08A Panel PC
Page 34
Figure 3-20: Install into a Rack/Cabinet
Step 5: Once the AFL-F08A with the attached rack/cabinet bracket has been properly
inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to
the front of the rack or cabinet (
Figure 3-20).Step 5:
3.9 Bottom Panel Connectors
This section provides and overview of the connectors on the bottom panel.
3.9.1 LAN Connection
There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 6: Locate the RJ-45 connectors on the bottom panel of the AFL-F08A.
Step 7: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the bottom panel of the AFL-F08A.