User Manual

AFL-F08A Panel PC
Page 16
Step 1: Remove the retention screws and lift the cover off the flat panel PC.
Figure 3-1: Back Cover Retention Screws
Step 2: Use a screwdriver to gently pry the edges of the system loose.
Figure 3-2: Pry The Rear Cover Off
Step 3: The cover will come off easily. Slide down slightly to clear the serial port
connectors. Step 0:
3.5 CF Card Installation
To install the CompactFlash® card, the cover plate must be removed. To remove the cover
plate and install the CompactFlash® card, follow the instructions below.