User Manual

AFL-xxA-N26 Series Panel PC
Page 37
Figure 3-6: PCIe Mini Slot Location
Step 3: Insert into the socket at an angle. Line up the notch on the card with the notch
on the connector. Slide the PCIe Mini card into the socket at an angle of about
20º.
Figure 3-7: PCIe Mini Card Installation
Step 4: Push down until the card clips into place. Push the other end of the card
down until it clips into place on the plastic connector.
Step 5: Attach the thermal pad onto the mSATA card. Use the thermal pad come with
the AFL-xxA-N26 to attach onto the controller chips of the mSATA card
(
Figure 3-8). If there is a label sticker on the mSATA card, remove the sticker
first.