Manual

AFL-4 Series-N270 User Manual
Page 92

Auto DEFAULT
BIOS auto detects HDD SMART support.


Disabled
Prevents BIOS from using the HDD SMART feature.

Enabled
Allows BIOS to use the HDD SMART feature
 32Bit Data Transfer [Enabled]
Use the 32Bit Data Transfer BIOS option to enables or disable 32-bit data transfers.


Disabled
Prevents the BIOS from using 32-bit data transfers.

Enabled DEFAULT
Allows BIOS to use 32-bit data transfers on supported
hard disk drives.
6.3.3 Super I/O Configuration
Use the Super I/O Configuration menu (6BIOS Menu 6) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Configure ITE8718 Super IO Chipset

Serial Port1 Address [3F8/IRQ4]
Serial Port3 Address [3E8]
Serial Port3 IRQ [11]
Select RS232 or RS422/RS485 [RS232]
Allows BIOS to Select
Serial Port1 Base
Addresses.
 Select Screen
  Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 6: Super IO Configuration
 Serial Port1 Address [3F8/IRQ4]
Use the Serial Port1 Address option to select the Serial Port 1 base address.


Disabled
No base address is assigned to Serial Port 1