Owner manual

AFL-4 Series-N270 User Manual
Page 80
Figure 5-3: DDR SO-DIMM Module Installation
5.5.2 CF Card Replacement
The AFL-4 Series-N270 has one CF Type II slot. Follow the instructions below to replace
the CF card.
Step 1: Follow all anti-static procedures. See Section 5.2.
Step 2: T
urn off the power. See Section 5.3.
Step 3: Follow the instruction li
sted in Section 4.6 to repla
ce the CF card. Step 0:
5.6 Reinstalling the Covers
WARNING:
Failing to reinstall the covers may result in permanent damage to the
system. Please make sure all coverings are properly installed.
When maintenance procedures are complete, please make sure all the covers are
replaced, including the following:
 Aluminum cover
 CF card slot cover