Owner manual

AFL-4 Series-N270 User Manual
Page 50
4.9.1 Access the Jumpers
To access the jumpers, remove the back panel. To remove the back panel, please refer to
Section 4.5.
4.9.2 ATX/AT Power Mode Jumper
Jumper Label: JP4
Jumper Type:
2-pin header
Jumper Settings:
See Table 4-3
Jumper Loc
ation:
See Figure 4-5
The ATX/AT Powe
r Select jumper specifies the systems power mode as AT or ATX.
Setting Description
Open AT mode
Closed ATX mode (Default)
Table 4-2: ATX/AT Power Mode Jumper Settings
Figure 4-5: ATX/AT Power Mode Jumper