Owner manual

AFL-HM55 Series Panel PC
Page 31
Figure 3-9: JP8 Jumper Setting Location
3.9.5 COM3 TX Function Select Jumper
Jumper Label:
JP9
Jumper Type:
6-pin header
Jumper Settings:
See
Table 3-6
Jumper Location:
See
Figure 3-10
The COM3 TX Function Select jumper configures the TX pin on COM3 serial port
connector as RS-422 or RS-485. The COM3 TX Function Select jumper selection
options are shown in
Table 3-6.
JP9 Description
Short 1 – 3 RS-422 TX-
Short 2 – 4 RS-422 TX+
Short 3 – 5 RS-485 D-
Short 4 – 6 RS-485 D+
Table 3-6: COM3 TX Function Select Jumper Settings