Owner manual

AFL-HM55 Series Panel PC
Page 20
3.3 Installation and Configuration Steps
The following installation steps must be followed.
Step 1: Remove the HDD cover
Step 2: Install a SATA DOM card
Step 3: Install an HDD
Step 4: Remove the rear panel cover
Step 5: Remove the internal aluminum cover
Step 6: Configure the system jumpers
Step 7: Connect peripheral devices to the bottom panel of the flat panel PC
Step 8: Mount the flat panel PC
3.4 Removing the HDD Cover
Step 1: Remove one (1) retention screw on the cover. See Figure 3-1.