Manual

AFL-HM55 Series Panel PC
Page 97
6.6 Audio Driver Installation
To install the Realtek High Definition (HD) Audio driver, please follow the steps below.
6.6.1 BIOS Setup
Step 1: Enter the BIOS setup. To do this, reboot the system and press F2 during POST.
Step 2: Go to the Southbridge Configuration menu. Set the Audio Controller option to
[Azalia].
Step 3: Press F10
to save the changes and exit the BIOS setup. The system reboots.
6.6.2 Driver Installation
To install the audio driver, please do the following.
Step 1: Access the driver list shown in
Figure 6-1. (See Section 6.2)
Step 2: Click Audio then double click on the folder which corresponds to your operating
system.
Step 3: Locate the install icon and double click on it.
Step 4: The InstallShield Wizard starts (
Figure 6-19).
Figure 6-19: The InstallShield Wizard Starts
Step 5: The InstallShield Wizard is prepared to guide the user through the rest of the
process (
Figure 6-20).