Manual

AFOLUX AFL-15A-N270 Panel PC
Page 49
JP7 Description
Short 1-2 COM3 RI Pin use +12 V
Short 3-4 COM3 RI Pin use RI Default
Short 5-6 COM3 RI Pin use +5 V
Table 4-6: COM3 Pin 9 Setting Jumper Settings
The COM1 and COM3 Pin 9 Setting jumper locations are shown in Figure 4-8 below.
Figure 4-8: COM1 and COM3 Pin 9 Setting Jumper Locations
4.9.6 COM3 RX Function Select Jumper
Jumper Label:
JP8
Jumper Type:
8-pin header
Jumper Settings:
See
Table 4-7
Jumper Location:
See
Figure 4-9
The COM3 RX Function Select jumper sets the communication protocol used by the RX
serial communications port COM3 as RS-232, RS-422 or RS-485. The COM3 RX
Function Select jumper settings are shown in
Table 4-7.