Manual

AFL-08B-N270 User Manual
Page 38
Figure 2-10: Wall-mounting Bracket
Step 6: Insert the four monitor mounting screws provided in the wall mounting kit into the
four screw holes on the real panel of the panel PC and tighten until the screw
shank is secured against the rear panel (Figure 2-11).
Step 7: Align the mou
nting screws on the monitor rear panel with the mounting holes on
the bracket.
Step 8: Carefully insert the screws through the holes and gently pull the monitor
downwards until the monitor rests securely in the slotted holes (Figure 2-11).
Ensu
re that all four of the mounting screws fit snuggly into their respective
slotted holes.
NOTE:
In the diagram below the bracket is already installed on the wall.