User Manual

AFL-08AH-N270-CR Panel PC
Page 44
Figure 5-5: CF Card Location
Step 5: Insert a new CF card into the slot.
Step 6: Replace the plastic back cover..
Step 7: Once replaced reinsert the nine previously removed retention screws. Step 0:
WARNING:
Over-tightening back cover screws will crack the plastic frame.
Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm).
5.6 Reinstalling the Covers
WARNING:
Failing to reinstall the covers may result in permanent damage to the
system. Please make sure all coverings are properly installed.
When maintenance procedures are complete, please make sure all the covers are
replaced, including the following: