User Manual

AFL-08AH-N270-CR Panel PC
Page 41
To access the AFL-08AH-N270-CR internally the back cover must be removed. To remove
the back cover, please follow the steps below.
Step 1: Follow all anti-static procedures. See Section
5.2.
Step 2: Turn off the power. See Section
5.3.
Step 3: Remove the retention screws on the back. Remove the retention screws
(
Figure 5-1) from the back cover.
Figure 5-1: Back Cover Retention Screws
Step 4: Lift the cover off the system. Step 0:
5.4.2 Internal Aluminum Cover Removal
To remove the internal aluminum cover, follow the steps below.
Step 1: Remove the retention screws securing the internal aluminum cover (
Figure 5-2).