User Manual

AFOLUX LX Panel PC
Page 31
NOTE:
In the diagram below the bracket is already installed on the wall.
Step 9: Secure the panel PC by fastening the retention screw of the wall-mounting
bracket. (
Figure 3-6).Step 0:
Figure 3-6: Secure the Panel PC
3.7.2 Panel Mounting
To mount the AFOLUX LX flat panel PC into a panel, please follow the steps below.
Step 1: Select the position on the panel to mount the flat panel PC.
Step 2: Cut out a section from the panel that corresponds to the rear panel dimensions
of the flat panel PC. Take care that the panel section that is cut out is smaller