AFOLUX LX Panel PC Page i
AFOLUX LX Panel PC Revision Date Version Changes February, 2012 2.10 Updated for R21 version (Bluetooth function optional) October, 2011 1.02 Added RS-232/422/485 pinouts February, 2009 1.01 Added serial port cable removal instructions April, 2008 1.
AFOLUX LX Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
AFOLUX LX Panel PC Manual Conventions WARNING! Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. Warnings are easy to recognize. The word “warning” is written as “WARNING,” both capitalized and bold and is followed by text. The text is the warning message. A warning message is shown below: WARNING: This is an example of a warning message.
AFOLUX LX Panel PC NOTE: These messages inform the reader of essential but non-critical information. These messages should be read carefully as any directions or instructions contained therein can help avoid making mistakes. Notes are easy to recognize. The word “note” is written as “NOTE,” both capitalized and bold and is followed by text. The text is the cautionary message. A note message is shown below: NOTE: This is an example of a note message. Notes should always be read.
AFOLUX LX Panel PC Packing List NOTE: If any of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the AFOLUX LX from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@iei.com.tw. The items listed below should all be included in the AFOLUX LX package.
AFOLUX LX Panel PC Table of Contents 1 INTRODUCTION.......................................................................................................... 1 1.1 AFOLUX LX FLAT PANEL PC OVERVIEW ................................................................. 2 1.1.1 Model Variations ................................................................................................ 2 1.1.2 Applications .......................................................................................................
AFOLUX LX Panel PC 2.5.2 Features ........................................................................................................... 19 2.6 PERIPHERAL DEVICE INTERFACES, CONNECTORS, AND SLOTS ................................. 20 2.6.1 OEM Options ................................................................................................... 20 2.6.2 Internal Slots.................................................................................................... 20 2.6.
AFOLUX LX Panel PC 5.1.1 Starting Setup................................................................................................... 47 5.1.2 Using Setup ...................................................................................................... 47 5.1.3 Getting Help..................................................................................................... 48 5.1.4 Main BIOS Menu ............................................................................................. 49 5.
AFOLUX LX Panel PC E.3.2 Enable the DIO Output Function .................................................................... 90 F WATCHDOG TIMER ................................................................................................. 91 G ADDRESS MAPPING ................................................................................................ 94 G.1 IO ADDRESS MAP .................................................................................................... 95 G.
AFOLUX LX Panel PC List of Figures Figure 1-1: AFOLUX LX..................................................................................................................2 Figure 1-2: Front View ....................................................................................................................4 Figure 1-3: Rear View .....................................................................................................................5 Figure 1-4: Top View.....................................
AFOLUX LX Panel PC List of Tables Table 1-1: Model Variations ...........................................................................................................2 Table 1-2: AFOLUX LX System Specifications ............................................................................8 Table 1-3: Motherboard Specifications ........................................................................................9 Table 1-4: TFT LCD Monitor Specifications .................................................
AFOLUX LX Panel PC BIOS Menus BIOS Menu 1: Award BIOS CMOS Setup Utility ........................................................................49 BIOS Menu 2: Standard CMOS Features....................................................................................51 BIOS Menu 3: Advanced BIOS Features ....................................................................................55 BIOS Menu 4: Advanced Chipset Features................................................................................
AFOLUX LX Panel PC Chapter 1 1 Introduction Page 1
AFOLUX LX Panel PC 1.1 AFOLUX LX Flat Panel PC Overview Figure 1-1: AFOLUX LX The AFOLUX LX flat panel PC is a flexible, multi-functional and fanless flat panel PC that can be applied in diverse operational environments and implemented in multi-faceted applications. The AFOLUX LX comes fully kitted with a high-performance motherboard and a host of other peripheral interface connectors. The integrated wireless LAN module ensures an uninterrupted wireless connection.
AFOLUX LX Panel PC 1.1.2 Applications The AFOLUX LX all-in-one panel PC is designed for multiple applications. Its durability and strength makes it an ideal choice for public access computers.
AFOLUX LX Panel PC Bluetooth module (optional) Wireless LAN integrated with PIFA antenna Dual 10/100Mbps Ethernet support One CompactFlash® Type I/II slot Simplified installation process RoHS compliance 1.2 External Overview 1.2.1 General Description The AFOLUX LX is a stylish flat panel PC that comprises of a screen, rear panel, top panel, bottom panel and two side panels (left and right). An ABS/PC plastic front frame surrounds the front screen.
AFOLUX LX Panel PC 1.2.3 Rear Panel The rear panel provides access to retention screw holes that support the wall mounting. Refer to Figure 1-3. Figure 1-3: Rear View 1.2.4 Top Panel and Side Panels The top panel and side panels of AFOLUX LX provides access to slots that support panel mount and rack mount (Figure 1-4 and Figure 1-5).
AFOLUX LX Panel PC Figure 1-5: Side View 1.2.5 Bottom Panel The bottom panel of the AFOLUX LX has the following I/O interfaces (Figure 1-6): 1 x RS-232 serial port connector 1 x RS-232 or RS-422/485 serial port connector (selected by a jumper) 1 x AC power adapter connector 1 x RJ-45 Gigabit Ethernet connectors 2 x USB 2.
AFOLUX LX Panel PC 1.3 Internal Overview The AFOLUX LX internal components are protected in a plastic back cover. An AT/ATX switch is in the left side of the aluminum chassis inside the plastic cover. Other internal components, the motherboard, wireless LAN module and DDR memory module, are installed in the aluminum chassis on a metal sheet that protects the rear of the TFT LCD screen. Below the metal sheet is a circuit board that is connected to the screen and the motherboard. 1.4 Specifications 1.4.
AFOLUX LX Panel PC SPECIFICATION AFL-056-LX 2 AFL-057-LX Brightness 350 cd/m 400 cd/m2 Contrast Ratio 400:1 500:1 Colors 262K Pixel Pitch (H x V) 0.118 x 0.362 0.06 x 0.18 Viewing Angle (H-V) 100/60 140/100 Backlight MTBF 30000 hrs 50000 hrs Touch Screen 4-wire resistive type Extension 1 x Wireless LAN module (USB 2.0 interface) 1 x Optional Bluetooth module (USB 2.0 interface) SSD CompactFlash® Type I/II Audio AMP 1.5W + AMP 1.
AFOLUX LX Panel PC 1.4.3 Motherboard Specifications The AFOLUX LX come with an AFLMB-LX2-R10 motherboard. The technical specifications of the motherboard are listed in Table 1-3.
AFOLUX LX Panel PC SPECIFICATION AFL-056A-LX AFL-057A-LX Brightness (cd/m ) 500 400 Contrast Ratio 400:1 300:1 Response Time (ms) 15(Tr) / 20(Tf) 15(Tr) / 35(Tf) Supply Voltage (V) 3.3 3.3 Backlight 1 CCFL 1 CCFL Backlight MTBF (hrs.) 30000 30000 Dimensions (mm) 126.5 x 100 x 11.1 127 x 98.43 x 7 2 Table 1-4: TFT LCD Monitor Specifications 1.4.5 Touch Screen Specifications The AFOLUX LX come with an analog resistive type touch panel. Table 1-5 lists the touch panel specifications.
AFOLUX LX Panel PC 1.4.6 Bluetooth Module Specifications (Optional) The optional Bluetooth module enables the transmission between various peripheral devices through a Bluetooth network. The peripheral devices may include: Headsets Barcode readers PDA Printers Cell phones Keyboard and mouse The technical specifications of the Bluetooth module are listed in Table 1-7. Specification Bluetooth Module Standard Bluetooth v2.0 Frequency Band 2.402GHz~2.
AFOLUX LX Panel PC Specification Standards Wi-Fi Module IEEE 802.11b (11 Mb/s) IEEE 802.11g (54 Mb/s) Frequency Band 2.4 – 2.5 GHz Data Rate Automatically modulated 6, 9, 12, 18, 24, 36, 48 or 54 Mb/s for IEEE 802.11g 1, 2, 5.5 or 11 Mb/s for IEEE 802.11b Security 64/128 bit WEP WPA 1.0/2.
AFOLUX LX Panel PC 1.5 Dimensions The dimensions of the AFL-056A-LX and AFL-057-LX flat panel PC are shown in Figure 1-7 below.
AFOLUX LX Panel PC Chapter 2 2 Motherboard Page 14
AFOLUX LX Panel PC 2.1 Introduction The AFOLUX LX flat screen PC contains the AFLMB-LX2-R10 motherboard. The motherboard is the heart of any computer and is responsible for transmitting, receiving and processing data as well as driving the different onboard devices. This chapter gives a brief introduction to the AFLMB-LX2-R10 motherboard. 2.2 CPU Support The AFLMB-LX2-R10 motherboard comes with a preinstalled AMD Geode™ LX 800 500MHz CPU. 2.2.
AFOLUX LX Panel PC 1.8W Typical (3.9W TDP) @ 500MHz GeodeLink active hardware power management Hardware support for standard ACPI software power management I/O companion SUSP#/SUSPA# power controls Lower power I/O Wakeup on SMI/INTR 2.3 System Chipset The AFLMB-LX2-R10 motherboard has a preinstalled AMD Geode™ CS5536 system chipset. The system chipset features are listed below.
AFOLUX LX Panel PC o o o o o o o o IR Communication Port System Management Bus (SMB) Controller LPC (Low Pin Count) Port General Purpose I/Os (GPIOs) 8 Multi-Function General Purpose Timers (MFGPTs) Real-Time Clock (RTC) with CMOS RAM Power Management Controller ACPI v2.0 compliant 2.
AFOLUX LX Panel PC Feature AMD Geode™ LX Processor Bresenham Lines Yes Patterned (stippled) Lines Yes Screen to Screen BLT Yes Screen to Screen BLT with mono expansion Yes Memory to Screen BLT Yes (throttled rep movs writes) Accelerated Text No Pattern Size (Mono) 8x8 pixels Pattern Size (Color) 8x8 pixels Monochrome Pattern Yes (with inversion) Dithered Pattern (4 color) No Color Pattern 8, 16, 32 bpp Transparent Pattern Monochrome Solid Fill Yes Pattern Fill Yes Transparent S
AFOLUX LX Panel PC 2.5 Ethernet Controller Specifications 2.5.1 Overview The Realtek RTL8100BL is a single-chip Fast Ethernet controller. It is enhanced with an ACPI (Advanced Configuration Power Interface) management function for PCI that provides efficient power management for operating systems with OSPM (Operating System Directed Power Management).
AFOLUX LX Panel PC 2.6 Peripheral Device Interfaces, Connectors, and Slots The peripheral device connectors, interfaces and slots on the AFLMB-LX2-R10 motherboard are listed in the sections below. 2.6.1 OEM Options Many of the peripheral device connectors listed below are not connected to any devices. These connectors are reserved for OEM customizations. For a customized option, please contact the vendor, reseller or IEI sales representative. 2.6.
AFOLUX LX Panel PC 1 x Power connector Page 21
AFOLUX LX Panel PC Chapter 3 3 Installation Page 22
AFOLUX LX Panel PC 3.1 Installation Precautions When installing the flat panel PC, please follow the precautions listed below: Power turned off: When installing the flat panel PC, make sure the power is off. Failing to turn off the power may cause severe injury to the body and/or damage to the system. Certified Engineers: Only certified engineers should install and modify onboard functionalities. Mounting: The flat panel PC is a heavy device.
AFOLUX LX Panel PC Step 1: Unpack the flat panel PC Step 2: Install CF card Step 3: Mount the flat panel PC Step 4: Connect peripheral devices to the bottom panel of the flat panel PC Step 5: Configure the systemStep 0: 3.4 Unpacking To unpack the flat panel PC, follow the steps below: WARNING! The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the flat panel PC has been properly installed.
AFOLUX LX Panel PC 3.4.
AFOLUX LX Panel PC Quantity 1 Item Image 128MB CompactFlash® card with Windows CE 5.0 pre-installed and SDK 1 1GB CompactFlash® card with Windows XPE pre-installed If any of these items are missing or damaged, contact the distributor or sales representative immediately. 3.5 CF Card Installation The AFOLUX LX has one CF Type II slot inside the rear panel. To install the CF card, follow the instructions below.
AFOLUX LX Panel PC Step 3: Locate the CF slot. Insert a CF card into the slot (Figure 3-2). Figure 3-2: CF Card Location Step 4: Replace the plastic back cover. A bit of force is needed when pushing the bottom part of the cover down to the chassis. Step 5: Once replaced reinsert the nine previously removed retention screws. Step 0: 3.6 AT/ATX Mode Selection AT and ATX power modes can both be used on the AFOLUX LX. The selection is made through an AT/ATX switch on the rear panel (Figure 3-3).
AFOLUX LX Panel PC 3.6.1 AT Power Mode With the AT mode selected, the power is controlled by a central power unit rather than a power switch. The AFOLUX LX panel PC turns on automatically when the power is connected. The AT mode benefits a production line to control multiple panel PCs from a central management center and other applications including: ATM Self-service kiosk Plant environment monitoring system Factory automation platform Manufacturing shop flow 3.6.
AFOLUX LX Panel PC Panel mounting Arm/Stand mounting The four mounting methods are described below. 3.7.1 Wall Mounting To mount the flat panel PC onto the wall, please follow the steps below. Step 1: Select the location on the wall for the wall-mounting bracket. Step 2: Carefully mark the locations of the four brackets screw holes on the wall. Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention screws.
AFOLUX LX Panel PC Step 6: Insert the four monitor mounting screws provided in the wall mounting kit into the four screw holes on the real panel of the flat panel PC and tighten until the screw shank is secured against the rear panel (Figure 3-5). Step 7: Align the mounting screws on the monitor rear panel with the mounting holes on the bracket. Step 8: Carefully insert the screws through the holes and gently pull the monitor downwards until the monitor rests securely in the slotted holes (Figure 3-5).
AFOLUX LX Panel PC NOTE: In the diagram below the bracket is already installed on the wall. Step 9: Secure the panel PC by fastening the retention screw of the wall-mounting bracket. (Figure 3-6).Step 0: Figure 3-6: Secure the Panel PC 3.7.2 Panel Mounting To mount the AFOLUX LX flat panel PC into a panel, please follow the steps below. Step 1: Select the position on the panel to mount the flat panel PC.
AFOLUX LX Panel PC than the overall size of the metal frame that surrounds the flat panel PC but just large enough for the rear panel of the flat panel PC to fit through (Figure 3-7). Figure 3-7: Panel Opening Step 3: Slide the flat panel PC through the hole until the aluminum frame is flush against the panel. Step 4: Insert the panel mounting clamps into the pre-formed holes along the edges of the chassis, behind the aluminum frame. There are a total of 4 panel mounting clamps on the AFOLUX LX.
AFOLUX LX Panel PC Figure 3-8: Tighten the Panel Mounting Clamp Screws 3.7.3 Arm/Stand Mounting The AFOLUX LX is VESA (Video Electronics Standards Association) compliant and can be mounted on an arm with a 75mm interface pad. To mount the AFOLUX LX on an arm, please follow the steps below. Step 1: The arm/stand is a separately purchased item. Please correctly mount the arm/stand. To do this, refer to the installation documentation that came with the mounting arm.
AFOLUX LX Panel PC Step 2: Once the mounting arm/stand has been firmly attached to the surface, lift the flat panel PC onto the interface pad of the mounting arm. Step 3: Align the retention screw holes on the mounting arm interface with those in the flat panel PC. The arm mount retention screw holes are shown in Figure 3-9.
AFOLUX LX Panel PC Figure 3-10: LAN Connection Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cable RJ-45 connector into the onboard RJ-45 connector. Step 0: 3.8.2 Serial Device Connection The AFOLUX LX has two serial device connectors on the bottom panel. The two serial device slots (RJ-45) connect to a cable with a standard DB-9 connector at the other end (cables included). Follow the steps below to connect a serial device to the AFOLUX LX panel PC.
AFOLUX LX Panel PC Figure 3-11: Serial Device Connector Step 4: Secure the connector. Secure the serial device connector to the external interface by tightening the two retention screws on either side of the connector. To remove the serial device cable, follow the instructions below. Step 1: Pull back the cover on the RJ-45 plug. Step 2: Insert a screwdriver between the case and the clip on the RJ-45 plug. Step 3: Twist the screwdriver and pull the plug to release.
AFOLUX LX Panel PC 3.8.2.1 RJ-45 Serial Port Pinouts The pinouts for RS-232, RS-422 and RS-485 communication are shown below. The COM1 serial port is RS-232 only. PIN NO. RS-232 RS-422 RS-485 1 DCD TX- D- 2 DSR RX- 3 RX TX+ 4 RTS RX+ 5 TX 6 CTS 7 DTR 8 RI SHIELD GND D+ Table 3-1: RJ-45 Serial Port Pinouts Figure 3-13: RJ-45 Serial Port Pinout Location 3.8.2.
AFOLUX LX Panel PC PIN NO. RS-232 RS-422 6 DSR RX- 7 RTS RX+ 8 CTS 9 RI RS-485 Table 3-2: RS-232/422/485 Pinouts Figure 3-14: Serial Port Pinout Location 3.8.3 USB Device Connection There are two external USB 2.0 connectors. To connect a USB 2.0 or USB 1.1 device, please follow the instructions below. Step 1: Located the USB connectors. The locations of the USB connectors are shown in Chapter 2. Step 2: Align the connectors.
AFOLUX LX Panel PC Figure 3-15: USB Device Connection Step 3: Insert the device connector. Once aligned, gently insert the USB device connector into the onboard connector.
AFOLUX LX Panel PC Chapter 4 4 System Maintenance Page 40
AFOLUX LX Panel PC 4.1 System Maintenance Introduction If the components of the AFOLUX LX fail they must be replaced, such as the wireless LAN module or the motherboard. Please contact the system reseller or vendor to purchase the replacement parts. Back cover removal instructions and jumper settings for the AFOLUX LX are described below. 4.2 Motherboard Replacement A user cannot replace the motherboard. If the motherboard fails it must be shipped back to IEI to be replaced.
AFOLUX LX Panel PC Inverter To remove the motherboard for parts replacement, follow the steps below. Step 1: Remove the motherboard retention screws holding down the motherboard (Figure 4-1). Figure 4-1: Motherboard Retention Screws Step 2: Remove the two retention screws holding the bottom panel (Figure 4-2).
AFOLUX LX Panel PC Step 3: Remove the two hexagonal pillars on the bottom panel (Figure 4-3). Figure 4-3: Two Hexagonal Pillars on the Bottom Panel Step 4: Push the external interface connector apart from the aluminum cover and lift the aluminum cover off the AFL-07A-LX. Step 5: Disconnect the power switch cable from the motherboard and remove the aluminum cover. Step 0: 4.4 Memory Module Replacement The flat panel PC is preinstalled with a 256 MB, 512 MB or 1.0 GB DDR memory module.
AFOLUX LX Panel PC Figure 4-4: SO-DIMM Socket Location Step 4: Remove the DDR memory module by pulling both the spring retainer clips outward from the socket. Step 5: Grasp the DDR memory module by the edges and carefully pull it out of the socket. Step 6: Install the new DDR memory module by pushing it into the socket at an angle (Figure 4-5). Step 7: Gently pull the spring retainer clips of the SO-DIMM socket out and push the rear of the DDR memory module down (Figure 4-5).
AFOLUX LX Panel PC Figure 4-5: DDR SO-DIMM Module Installation Page 45
AFOLUX LX Panel PC Chapter 5 5 BIOS Setup Page 46
AFOLUX LX Panel PC 5.1 Introduction A licensed copy of Phoenix Award BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows users to modify the basic system configuration. This chapter describes how to access the BIOS setup program and the configuration options that may be changed. 5.1.1 Starting Setup The Phoenix Award BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways. 1. Press the DELETE key as soon as the system is turned on or 2.
AFOLUX LX Panel PC Key Function F1 General help, only for Status Page Setup Menu and Option Page Setup Menu F2 Item help F5 Previous values for the page menu items F6 Fail-safe defaults for the current page menu items F7 Optimized defaults for the current page menu items F9 Menu in BIOS F10 Save changes and Exit BIOS Table 5-1: BIOS Navigation Keys 5.1.
AFOLUX LX Panel PC 5.1.4 Main BIOS Menu Once the BIOS opens, the main menu (BIOS Menu 1) appears. BIOS Menu 1: Award BIOS CMOS Setup Utility NOTE: The following sections will completely describe the menus listed below and the configuration options available to users. The following menu options are seen in BIOS Menu 1. Standard CMOS Features: Changes the basic system configuration. Advanced BIOS Features: Changes the advanced system settings.
AFOLUX LX Panel PC Load Fail-Safe Defaults Use the Load Fail-Safe Defaults option to load failsafe default values for each BIOS parameter in the setup menus. Press F6 for this operation on any page. Load Optimized Defaults Use the Load Optimized Defaults option to load optimal default values for each BIOS parameter in the setup menus. Press F7 for this operation on any page. Set Supervisor Password Use the Set Supervisor Password option to set the supervisor password.
AFOLUX LX Panel PC 5.2 Standard CMOS Features Use the Standard CMOS Features BIOS menu (BIOS Menu 2) to set basic BIOS configuration options. BIOS Menu 2: Standard CMOS Features Date [Day mm:dd:yyyy] Use the Date option to set the system date. Time [hh/mm/ss] Use the Time option to set the system time. IDE Master and IDE Slave When entering setup, BIOS auto detects the presence of IDE devices. The Standard CMOS Features menu shows the status of the auto detected IDE devices.
AFOLUX LX Panel PC IDE device configurations are changed or set in the IDE Configuration menu. If an IDE device is detected, and one of the above listed two BIOS configuration options is selected, the IDE configuration options shown in Section 5.2.1 appear. Base Memory: The Base Memory is NOT user configurable. The POST determines the amount of base (or conventional) memory installed in the system.
AFOLUX LX Panel PC Channel 1 Slave If no drives are connected to the IDE channel select this None option. Once set, this IDE channel becomes inaccessible and any drives attached to it are undetected. Auto (Default) Setting this option allows the device to be automatically detected by the BIOS. Selecting this option allows manual configuration of the Manual device on the IDE channel in BIOS.
AFOLUX LX Panel PC Cylinder The Cylinder specification indicates how many cylinders (tracks) are on the HDD installed in the system. Head The Head specification indicates how many logical heads are on the HDD installed in the system. Precomp The Precomp specification indicates on what track the write precompensation begins. Landing Zone The Landing Zone specification indicates where the disk head will park itself after the system powers off.
AFOLUX LX Panel PC 5.3 Advanced BIOS Features Use the Advanced BIOS Features menu (BIOS Menu 3) to configure the CPU and peripheral device configuration options. BIOS Menu 3: Advanced BIOS Features Virus Warning [Disabled] NOTE: Many disk diagnostic programs can cause the above warning message to appear when the program attempts to access the boot sector table. If you are running such a program, it is recommended that the virus protection function be disabled beforehand.
AFOLUX LX Panel PC Activates automatically when the system boots up Enabled causing a warning message to appear when anything attempts to access the boot sector or HDD partition table. Disabled (Default) No warning message appears when there is an attempt to access the boot sector or HDD partition table. CPU Internal Cache [Enabled] Use the CPU Internal Cache option to enable or disable the internal CPU cache. The internal CPU cache is disabled.
AFOLUX LX Panel PC Boot Device configuration options are: LS120 HDD-0 SCSI CDROM HDD-1 USB-FDD USB-ZIP USB-CDROM USB-HDD LAN Disabled Boot Other Device [Enabled] Use the Boot Other Device option to determine whether the system uses a second or third boot device if the first boot device is not found. The system does not look for second and third boot Disabled devices if the first one is not found. Enabled (Default) The system looks for second and third boot devices if the first one is not found.
AFOLUX LX Panel PC enabled, the BIOS reports as before, but it then waits a moment, and, if the key is still held down, it begins to report that the key has been pressed repeatedly. This feature accelerates cursor movement with the arrow keys. Disabled (Default) Disables the typematic rate. Enables the typematic rate. Enabled Typematic Rate (Chars/sec) [6] The Typematic Rate option can only be configured if the Typematic Rate Setting is enabled.
AFOLUX LX Panel PC Security Option [Setup] Use the Security Option to limit access to both the system and Setup, or just Setup. Setup (Default) The system does not boot and access to Setup is denied if the correct password is not entered at the prompt. The system boots, but access to Setup is denied if the System correct password is not entered at the prompt. NOTE: To disable security, select the password setting in the Main Menu.
AFOLUX LX Panel PC feature on support hard disk drives. Delay For HDD (Secs) Use the Delay For HDD option to specify how long the system should wait before trying to access the main drive. If this option is set too low, the system will try to access the disk before it has had adequate time to spin up and become accessible. If warnings like “Windows – No Disk” appear, try setting this value larger until the message goes away. The valid range is 3 – 13 secs (3 default).
AFOLUX LX Panel PC 5.4 Advanced Chipset Features Use the Advanced Chipset Features menu (BIOS Menu 4) to change chipset configuration options. BIOS Menu 4: Advanced Chipset Features CPU Frequency [500MHz] Use the CPU Frequency option to set the CPU frequency. The CPU Frequency options are: Auto 200MHz 333MHz 400MHz 433MHz 500MHz (Default) Memory Frequency [Auto] Use the Memory Frequency option to set the frequency of the installed DRAM modules.
AFOLUX LX Panel PC Auto (Default) 100MHz 133MHz 166MHz 200MHz Video Memory Size [32M] Use the Video Memory Size option to determine how much memory is allocated to the video graphics device. The Video Memory Size options are: None 8M 16M 32M (Default) 64M 128M 254M Output Display [Panel & CRT] Use the Display Device Select BIOS feature to determine what displays are used. Dual display functionality is enabled here.
AFOLUX LX Panel PC 5.5 Integrated Peripherals Use the Integrated Peripherals menu (BIOS Menu 5) to change the configuration options for the attached peripheral devices. BIOS Menu 5: Integrated Peripherals On-Chip IDE Channel 1 [Enabled] Use the On-Chip IDE Channel 1 option to specify if the system uses the integrated primary IDE channel or not. The primary IDE channel is not used. Disabled Enabled (Default) The primary IDE channel is used.
AFOLUX LX Panel PC Mode 0 PIO mode 0 selected with a maximum transfer rate of 3.3MBps. Mode 1 PIO mode 1 selected with a maximum transfer rate of 5.2MBps. Mode 2 PIO mode 2 selected with a maximum transfer rate of 8.3MBps. Mode 3 PIO mode 3 selected with a maximum transfer rate of 11.1MBps. Mode 4 PIO mode 4 selected with a maximum transfer rate of 16.6MBps.
AFOLUX LX Panel PC Onboard Serial Port 1 [3F8/IRQ4] Use the Onboard Serial Port 1 option to select the I/O address and IRQ for the onboard serial port 1. The serial port can be disabled or the I/O address and the IRQ can be automatically selected by the BIOS. The Onboard Serial Port 1 options are: Disabled 3F8/IRQ4 (Default) 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Auto Onboard Serial Port 2 [2F8/IRQ3] Use the Onboard Serial Port 2 option to select the I/O address and IRQ for the onboard serial port 2.
AFOLUX LX Panel PC Touch controller Use IRQ [IRQ7] Use the Touch controller Use IRQ option to select the IRQ for the onboard touch panel controller port. The touch panel controller port can be disabled or the IRQ can be automatically selected by the BIOS. The Touch controller Use IRQ options are: IRQ5 IRQ7 (Default) 5.6 Power Management Setup Use the Power Management Setup menu (BIOS Menu 6) to set the BIOS power management and saving features.
AFOLUX LX Panel PC Soft-Off by PWR-BTN [Instant-Off] Use the Soft-Off by PWR-BTN BIOS option to specify how the system turns off. These options are only available for ATX mode. Instant-Off (Default) The system turns off immediately when the power button is pressed. The power button has to be pressed for 4 seconds Delay 4 Secs to get the system to turn off immediately. 5.7 PnP/PCI Configurations Use the PnP/PCI Configurations menu (BIOS Menu 7) to set the plug and play, and PCI options.
AFOLUX LX Panel PC specifications, BIOS configures all the devices in the system. Set this option if the system is running Plug and Play aware Yes operating systems. The operating system changes the interrupt, I/O, and DMA settings. Reset Configuration Data [Disabled] Use the Reset Configuration Data option to reset the Extended System Configuration Data (ESCD) when exiting setup if booting problems occur after a new add-on is installed.
AFOLUX LX Panel PC The above options all have the following default options. PCI Device (Default) The IRQ is assigned to legacy ISA for devices compliant with the original PC AT bus specification, PCI/ISA PNP for devices compliant with the Plug and Play standard whether designed for PCI or ISA bus architecture. The IRQ is reserved by BIOS. Reserved x Memory Resources [Press Enter] The Memory Resources menu can only be accessed if the Resources Controlled By option is set to Manual.
AFOLUX LX Panel PC Appendix A A Safety Precautions Page 70
AFOLUX LX Panel PC WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the AFOLUX LX. A.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: A.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times. Follow the electrostatic precautions outlined below whenever the AFOLUX LX is opened.
AFOLUX LX Panel PC A.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the AFOLUX LX may result in permanent damage to the AFOLUX LX and sever injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the AFOLUX LX. Dry climates are especially susceptible to ESD.
AFOLUX LX Panel PC A.1.3 Product Disposal CAUTION: Risk of explosion if battery is replaced by and incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations. Outside the European Union - If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method.
AFOLUX LX Panel PC Except for the LCD panel, never spray or squirt liquids directly onto any other components. To clean the LCD panel, gently wipe it with a piece of soft dry cloth or a slightly moistened cloth. The interior of the AFOLUX LX does not require cleaning. Keep fluids away from the AFOLUX LX interior. Be cautious of all small removable components when vacuuming the AFOLUX LX. Turn the AFOLUX LX off before cleaning the AFOLUX LX.
AFOLUX LX Panel PC Appendix B B BIOS Options Page 75
AFOLUX LX Panel PC Below is a list of BIOS configuration options in the BIOS chapter. Load Fail-Safe Defaults .......................................................................................................50 Load Optimized Defaults.....................................................................................................50 Set Supervisor Password....................................................................................................50 Set User Password .........................
AFOLUX LX Panel PC Delay For HDD (Secs) ..........................................................................................................60 Small Logo (EPA) Show [Disabled]....................................................................................60 CPU Frequency [500MHz] ...................................................................................................61 Memory Frequency [Auto] ...............................................................................................
AFOLUX LX Panel PC Appendix C C Software Drivers Page 78
AFOLUX LX Panel PC C.1 Remote Management Tool IEI provides optional pre-installed Windows XP Embedded or Windows CE 5.0 turnkey solutions tailored for the AFOLUX LX series. For information about configuring the operating system, adding remote management tools or additional software and drivers, refer to the software user manuals on IEI AFOLUX LX Utility CD that came with the AFOLUX LX flat panel PC. C.2 Touch Panel Driver C.2.
AFOLUX LX Panel PC Step 1: Insert the driver CD that came with the AFOLUX series into the CD drive. Step 2: Once the CD drive is installed, the screen in Figure C-1 appears. Figure C-1: Driver CD Pop Up Screen Step 3: Select the operating system installed on the system from the menu on the screen. NOTE: The following description is for driver installation using a Windows 2000 OS. If a different OS is installed, please refer to the driver user manual for the relevant OS.
AFOLUX LX Panel PC Figure C-2: Welcome Screen Step 5: The license agreement shown in Figure C-3 appears. Agree to the license by selecting “I accept the terms in the license agreement”. Figure C-3: License Agreement Step 6: Click NEXT and the Installshield Wizard is ready to install the program (Figure C-4).
AFOLUX LX Panel PC Figure C-4: Ready to Install the Program Step 7: Click INSTALL to continue. The Installing PenMount DMC9000 screen appears as the program is installed (Figure C-5). Figure C-5: Installing PenMount DMC9000 Step 8: The user is then prompted to select to restart the computer now or later (Figure C-6). For the settings to take effect, the computer must be restarted. Click Yes to restart the computer.
AFOLUX LX Panel PC Figure C-6: Reboot the Computer C.2.3 Touch Panel Driver Configuration To configure the touch panel driver options, refer to the PenMount user manual located on the driver installation CD.
AFOLUX LX Panel PC Appendix D D Terminology Page 84
AFOLUX LX Panel PC AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration and Power Interface (ACPI) is an OS-directed configuration, power management, and thermal management interface. AHCI Advanced Host Controller Interface (AHCI) is a SATA Host controller register-level interface. ATA The Advanced Technology Attachment (ATA) interface connects storage devices including hard disks and CD-ROM drives to a computer.
AFOLUX LX Panel PC DMA Direct Memory Access (DMA) enables some peripheral devices to bypass the system processor and communicate directly with the system memory. DIMM Dual Inline Memory Modules are a type of RAM that offer a 64-bit data bus and have separate electrical contacts on each side of the module. DIO The digital inputs and digital outputs are general control signals that control the on/off circuit of external devices or TTL devices.
AFOLUX LX Panel PC LCD Liquid crystal display (LCD) is a flat, low-power display device that consists of two polarizing plates with a liquid crystal panel in between. LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed differential electrical signaling system commonly used to connect LCD displays to a computer. POST The Power-on Self Test (POST) is the pre-boot actions the system performs when the system is turned-on.
AFOLUX LX Panel PC Appendix E E Digital I/O Interface Page 88
AFOLUX LX Panel PC E.1 Introduction The DIO connector on the AFOLUX LX is interfaced to GPIO ports on the IT8712F Super I/O chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions.
AFOLUX LX Panel PC E.3 Assembly Language Samples E.3.1 Enable the DIO Input Function The BIOS interrupt call INT 15H controls the digital I/O. An assembly program to enable digital I/O input functions is listed below. MOV AX, 6F08H Sets the digital port as input INT 15H Initiates the INT 15H BIOS call E.3.2 Enable the DIO Output Function The BIOS interrupt call INT 15H controls the digital I/O. An assembly program to enable digital I/O output functions is listed below.
AFOLUX LX Panel PC Appendix F F Watchdog Timer Page 91
AFOLUX LX Panel PC NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMIs or a software bug.
AFOLUX LX Panel PC NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets.
AFOLUX LX Panel PC Appendix G G Address Mapping Page 94
AFOLUX LX Panel PC G.
AFOLUX LX Panel PC G.2 1st MB Memory Address Map Memory address Description 00000-9FFFF System memory A0000-BFFFF VGA buffer F0000-FFFFF System BIOS 1000000- Extend BIOS Table G-2: 1st MB Memory Address Map G.3 IRQ Mapping Table IRQ0 System Timer IRQ8 RTC clock IRQ1 Keyboard IRQ9 ACPI IRQ2 Available IRQ10 LAN IRQ3 COM2 IRQ11 LAN/USB2.
AFOLUX LX Panel PC G.
AFOLUX LX Panel PC Appendix H H Hazardous Materials Disclosure Page 98
AFOLUX LX Panel PC H.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
AFOLUX LX Panel PC Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl (CR(VI)) (PBB) Ethers (PBDE) Housing X O O O O X Display X O O O O X Printed Circuit X O O O O X X O O O O O X O O O O X Fan Assembly X O O O O X Power Supply X O O O O X O O O O O O Board Metal Fasteners Cable Assembly Assemblies Battery O: This toxic or hazardou
AFOLUX LX Panel PC 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯 (Pb) (Hg) (Cd) (CR(VI)) (PBB) 醚 (PBDE) 壳体 X O O O O X 显示 X O O O O X 印刷电路板 X O O O O X 金属螺帽 X O O O O O 电缆组装 X O O O O X 风扇组装 X O O O O X 电力供应组装 X O O O O X 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X
