User manual
Using detergent and additives
Measure out the detergent and the fabric
conditioner.
Detergent compartments
Detergent compartment for
washing phase.
Compartment for liquid addi‐
tives (fabric conditioner, starch).
CAUTION! Do
not exceed the
MAX level.
When you set a prewash option, put the de‐
tergent for prewash phase directly into the
drum.
Setting a programme
1. Turn the programme knob to switch
the appliance on and set the
programme:
• The indicator of the button Départ/
Pause flashes.
• The display shows the programme
duration.
2. If necessary, change the spin speed or
add available options. When you
activate an option, the indicator of the
set option comes on.
If you set something incorrect,
the display shows the message
.
Starting a programme without
the delay start
Press the button Départ/Pause.
• The indicator of the button Départ/
Pause stops to flash and stays on.
• The programme starts, the lid locks,
the indicator Verrouillage is on.
• The programme time decreases
with steps of one minute.
The drain pump can operate for
a short time at the beginning of
the washing cycle.
Starting a programme with the
delay start option
1. Press the button Départ Différé again
and again until the display shows the
delay you want to set.
2. Press the button Départ/Pause:
• The lid is locked and the indicator
Verrouillage is on.
• The appliance starts the
countdown.
• When the countdown is completed,
the programme starts automatically.
You can cancel or change the
set of the Départ Différé option
before you press the button
Départ/Pause. After pressing
the button Départ/Pause you
can only cancel the Départ
Différé option.
To cancel the Départ Différé option:
a. Press the button Départ/Pause to
set the appliance to pause. The
indicator of button Départ/Pause
flashes.
b. Press the button Départ Différé
until the display shows '.
Press the button Départ/Pause
again to start the programme
immediately.
Changing the options
You can change only some option before
they operate.
1. Press the button Départ/Pause. The
indicator flashes.
2. Change the options.
11