User manual

If you set something incorrect,
the display shows the message
.
Starting a programme without
the delay start
Press the button .
• The indicator of the button
stops to flash and stays on.
• The programme starts, the lid locks,
the indicator Verrouillage is on.
• The programme time decreases
with steps of one minute.
The drain pump can operate for
a short time at the beginning of
the washing cycle.
Starting a programme with the
delay start option
1. Press the button again and again
until the display shows the delay you
want to set. The delay start indicator
comes on.
2. Press the button
:
• The door is locked and the indicator
is on.
• The appliance starts the
countdown.
• When the countdown is completed,
the programme starts automatically.
You can cancel or change the
set of the option before you
press the button . After
pressing the button you can
only cancel the option.
To cancel the option:
a. Press the button to set the
appliance to pause. The indicator
of button flashes.
b. Press the button until the
display shows '.
Press the button again to start
the programme immediately.
Changing the options
You can change only some option before
they operate.
1. Press the button . The indicator
flashes.
2. Change the options.
3. Press the button . The programme
continues.
Opening the lid
While a programme operates or the delay
start operates, the appliance lid is locked.
CAUTION! If the temperature
and level of the water in the
drum are too high, you cannot
open the lid.
Open the lid during the first 10 minutes
of the cycle and when the delay start
operates:
1. Press the button to pause the
appliance.
2. Wait a couple of minutes and then you
can open a lid.
3. Close the lid and press button
again. The programme (or the delay
start) continues.
Open the lid when the programme
operates:
1. Turn the programme knob to position
Arrêt to deactivate the appliance.
2. Wait for some minutes and then open
the appliance lid.
3. Close the lid and set the programme
again.
Cancelling a running
programme
1. Turn the programme knob to position
to cancel the programme and to
deactivate the appliance.
12