Installation Guide

Page
9
of
16
Ver No.: 0.11D
Ver Date: 05-05-2020
Information included in this document is the property of IEE S.A. Copy, use or disclosure of its contents, even in part, is not permitted without the prior written
agreement of IEE. This document is strictly IEE confidential.
User Manual
Figure 8: CCU and Battery Housing
1.9 Bracket
The bracket holds the CCU and Battery housing to the vehicle using fasteners and screws. It
provides a solid attachment of housing to the vehicle body and securely holds the CCU and
LiDAS system battery modules without movement in the housing.
Figure 9: Housing Bracket
1.10 Fastener and Screws
One sensor housing will need two screws for mounting
Battery housing will need fasteners and screws for securing the housing
Two screws used for installing driver interface
2. Tools Required
General working tools like Drill, Screwdriver, Wire Stripper, Crimper