Manual

- 8 -
7. SDI IN Connects to the video source’s SDI output connector.
8. SDI OUT Loop-outputs the input SDI signal.
Used to allow for video monitoring on transmit side.
9. UNI/MULTI SW Selects the link mode.
 UNI ：Unicast mode
 MULTI ：Multicast mode
10. DC-IN Connects when external power supply is used.
 Connector XLR-4P male connector
 Input range DC 11～17V
 Pin assign No.1：negative(-) No.4：positive(+)
11. V-Plate Mounts CW-5HD TX to the V-Mount of selected source.
⑧
⑨
⑩
⑦
⑪