Datasheet

IDUINO for Maker’s life
www.openplatform.cc
Example Code:
******Code begin******
int Led = 13 ; // define LED Interface
int SENSOR = 10 ; // define the Hall magnetic sensor interface
int val ; // define numeric variables val
void setup ()
{
pinMode (Led, OUTPUT) ; // define LED as output interface
pinMode (SENSOR, INPUT) ; // define the Hall magnetic sensor line as
input
}
void loop ()
{
val = digitalRead (SENSOR) ; // read sensor line
if (val == LOW) // when the Hall sensor detects a magnetic field,
Arduino LED lights up
{
digitalWrite (Led, HIGH);
}
{
digitalWrite (Led, LOW);
}
}
******Code End******