User manual

IDUINO for maker’s life
www.openplatform.cc
3. Example
Here is an example show that the color of the LED blinking. The connection as
below:
********Code Begin********
void setup() {
// initialize digital pin 13 as an output.
pinMode(13, OUTPUT);
}
// the loop function runs over and over again forever
void loop() {
digitalWrite(13, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(13, LOW); // turn the LED off by making the voltage LOW
delay(1000); // wait for a second
}
********Code End********