User's Manual

DEACTIVATE TOUR MODE:

For best results, perform these steps im-

mediately after you end your trip.

1. Simultaneously press FUN/SET and

MODE. The TOUR number will dis-

play. The percentage (%) at the top

indicates the total used memory.

2. Press and hold FUN/SET for 2 seconds. This ENDS the

TOUR recording session.

3. Press MODE to return to the CLOCK display.

CLEAR ALL TOUR MEMORIES

For best results, perform these steps when

you no longer want to keep the data in the

watch or want to free up some memory.

Either:

1. Download the information to you PC (the

TOUR will be automatically cleared).

Or:

1. Deactivate the TOUR Mode. With the

END screen shown, press the FUN/SET.

CLR shows at the bottom of the display.

2. Press and hold FUN/SET until donE

shows at the bottom of the display.

3. Press FUN/SET again to display 0% and

confirm all data has been cleared.

4. Press MODE to return to the CLOCK display.

The maximum and minimum values for the various sub-

modes (i.e., max heart rate, or max altitude, etc) will remain

after all data has been cleared.

NOTE

PULSE (HEART RATE) MODEL

(TS 120/TS 130 ONLY)

The OUTBREAKER watch is equipped

with a PULSE Mode and heart rate chest

belt, which together allow you to measure

your heart rate (from 25-240 beats per

minute) while exercising. You can view

your heart rate with the Stopwatch, Timer

and Clock.

Press SELECT/+ to switch between the HEART RATE/CLOCK

(starting) and HEART RATE/STW (stopwatch) screens.

➔