User's Manual

If you find that the sensor icons are flashing, please wait until the icons stop flashing and
display on the screen.
Lap setup
1. After entering setup screen, press middle (2) button to enter Lap setup.
2. Press top (1) button. If you want to setup for Auto Lap, press top (1) button again, or
press middle (2) button to turn on Manual Lap.
3. Press middle (2) button to count by distance or press bottom (3) button to count by time.
To adjust the distance or time by pressing the following buttons:
 Top (1) button to increase value
 Bottom (3) button to decrease value
NOTE Long press to fast increase or decrease the value.
4. Press middle (2) button to confirm selection.
Interval setup
1. After entering setup screen, press bottom (3) button to enter Interval setup.
2. If you want to setup for Interv.by distance (counted by distance), press middle (2) button,
or press bottom (3) button for Interv.by time (counted by time).
3. Press middle (2) button to count by distance or press bottom (3) button to count by time.
To adjust the distance or time by pressing the following buttons:
 Top (1) button to increase value
 Bottom (3) button to decrease value
NOTE Long press to fast increase or decrease the value.
4. Press middle (2) button to confirm selection and enter to Rest by distance/time screen.
5. Press middle (2) button to count by distance or press bottom (3) button to count by time.
To adjust the distance or time by pressing the following buttons:
 Top (1) button to increase value
 Bottom (3) button to decrease value
6. Press middle (2) button to confirm selection.
HR Zone setup
1. After entering setup screen, toggle middle (2) button to enter HR Zone setup.
2. Press top (1) button to turn on HR Zone.