User's Manual

2. Press and toggle middle (2) button on the watch to enter CONNECT mode. Press top (1)
button to enter.
3. Tap CONNECT WITH WATCH on the mobile device to initiate synchronization while
pressing top (1) button again on the watch. Done displays on the watch until successfully
connect and download.
Icon
Meaning
The mobile device is searching for the watch for connection.
After connecting successfully, the downloading starts.
NOTE If your battery is low, pls change batt.for update displays and you
cannot continue entering other screens. Please replace battery following the
instructions, see page X
UPLOAD DATA ONTO MOBILE DEVICE
You could upload data from the watch onto the application.
1. In CONNECT mode, press top (1) button to enter and toggle middle (2) button to enter
upload memory display.
2. Press top (1) button to enter for selecting an exercise profile, toggle middle (2) button to
select your desired profile, then press top (1) button to start uploading.
3. Tap CONNECT WITH WATCH on the mobile device to initiate synchronization while
pressing top (1) button again on the watch. Done displays on the watch until successfully
connect and upload.
NOTE If the connection is failed, the watch automatically attempts to synchronize again.
SCREEN MESSAGE
Synchronization in progress
Synchronization successful
Synchronization failed. Watch attempts to synchronize again.
no memory
There is no data in the watch.
pls change
batt.for
update
The watch battery is low and needs to be replaced.