User's Manual

NOTE If you want to get back to the real-time display, return to the TIME setup mode and
then press top (1) button.
NOTE If the alarm is turned on, displays on the screen until you set the alarm setting to be
off.
NOTE You can independently set daily / weekday / weekend alarm.
NOTE If your watch is low battery, the beep is automatically turned off without displays.
SET USER PROFILE
You can choose to set user profile or downloading exercise applications (page
X) after setting the time profile, but we highly suggest that you could set up the
user profile before exercising.
You can set the user profile through application on your mobile device, and
update the profile to the watch. For detail, please refer to page X.
In USER setup mode, press top (1) button and continue to set your
user profile according to the following order: Gender, Birthday,
Weight (and measurement unit), Height (and measurement unit),
Stride (and measurement unit), Toggle and Power Save, by
pressing the following buttons:
1. Press top (1) button to increase value or select option; press
bottom (3) button to decrease value or select option.
2. Press middle (2) button to save setting and automatically move to
another setting display.
NOTE During exercise, if you want the watch to automatically toggle the exercise data, turn
on Toggle setting.
NOTE If the Power Save is set to on, the watch will go to sleep mode without any button
being pressed during 11pm to 6am. Tap the lens to display the screen again. You can set
desired time duration in POWER SAVE SETTING of the application