User's Manual

VIEW EXERCISE RECORD DURING SWIMMING

You could start swimming by following the below steps.

NOTE Make sure the watch has enough memory, otherwise no memory

displays when you press button after SWIMMING mode.

To view swimming records:

1. In SWIMMING mode, press top (1) button to enter start mode.

2. Toggle middle (2) button to select swim type and pool size (see above sections).

3. The watch starts counting.

If Auto lap is set, the stroke (stk), time (00’00’00) and calories (Cal) counting data

automatically display on the screen. Lap counting data displays when it reaches the

setting.

If Manual lap is set, press bottom (3) button to set for a lap during swimming. (See page

X for details.)

While viewing the screen and pressing top (1) button to pause the counting, stops flashing,

then select continue or stop. If you press bottom (3) button to stop counting, the SWIMMING

mode screen displays. Go directly to above step 1 for counting again.

NOTE If you set the watch to automatically toggle screens, the last three screens

automatically toggle to display every 5 seconds. Please see SET USER PROFILE for turning

on the toggle feature, page X).

NOTE If the lap counting reaches the 100

or the total hours of the exercise reaches 80 hours,

memory full displays on the screen with a long beep. You need to clear the memory for

further exercise purpose. (Please refer to page X for details.)

VIEW EXERCISE RECORD AFTER SWIMMING

You could view records after swimming on the watch by following the below steps.

To view exercise records:

1. In SWIMMING mode, press bottom (3) button to enter. The screen displays the latest

exercise date and time. Toggle middle (2) button to select the desired one, then press top