User's Manual

SWIMMING PROFILE

SETUP

You can do swimming setup on the watch. In SWIMMING mode, press top (1) button to enter

setup mode. The setup mainly includes the following parts:

 Swim type (page )

 Pool size (page )

 Calibration (page )

Swim type setup

1. In SWIMMING mode, press top (1) button to enter setup mode.

2. Press middle (2) button to enter swim type mode, then press top (1) button or press

bottom (3) button to select from ft.crawl (front crawl), backstr (backstroke), breastsr

(breaststroke) and butterfly.

3. Press middle (2) button again to confirm selection.

Pool size setup

1. In SWIMMING mode, press top (1) button to enter setup mode.

2. Toggle middle (2) button to enter pool size mode, then press top (1) button or press

bottom (3) button to select from 50m (meters) and 25m (meters).

3. Press middle (2) button again to confirm selection.

Calibration

1. In SWIMMING mode, press top (1) button to enter setup mode.

2. Toggle middle (2) button until start cali. displays.

3. Press top (1) button to start calibration.

Press bottom (3) button to exit.

4. Lap counting data displays. Once you successfully complete the calibration, cali.done

displays then after 2 seconds the screen goes back to setup screen.

If you want to stop the calibration, press top (1) button then cali.failed displays.