User's Manual

ManualsBrandsIDT Technology ManualsElectronicsBoot loadable platform with BLE

23-571

650 x 23C

1909

35-559

26 x 1.50

1947

37-622

700 x 35C

1958

47-559

26 x 1.95

2022

20-622

700 x 20C

2051

52-559

26 x 2.0

2054

23-622

700 x 23C

2070

25-622

700 x 25C

2080

28-622

700 x 28

2101

32-622

700 x 32C

2126

42-622

700 x 40C

2189

47-622

700 x 47C

2220

NOTE Wheel sizes on the above table are for reference only as wheel size depends on the

wheel type and air pressure.

VIEW EXERCISE RECORD DURING CYCLING

You could start cycling by following the steps below, and if you set up the Interval (page X),

the distance or timer will count down.

NOTE Make sure the watch has enough memory, otherwise no memory displays when you

press button after CYCLING mode.

To view cycling records:

1. In CYCLING mode, press top (1) button to enter, and the paired sensor icons display on

the screen. Press bottom (3) button to skip the searching mode if the sensor is added.

2. Press top (1) button to enter start mode. Counting starts while flashes. Heart rate

reading with icon ( ) and exercise time counting (00’00’00) display.

3. Press middle (2) button. You can see total distance (km) /speed (km/h),

cadence counting (rpm), calories counting (Cal) and time screen display.

 If Auto lap is set, the lap and time counting data automatically display on

the screen when they reach the setting.

 If Manual lap is set, press bottom (3) button to manually set for a lap.

While viewing the screen and pressing top (1) button to pause the counting, stops flashing,

then press top (1) button to select continue counting or press bottom (3) button to stop

counting. If you press bottom (3) button to stop counting, the CYCLING mode screen displays.

NOTE If you set the watch to automatically toggle screens, the last five screens automatically

toggle to display every 5 seconds. Please see SET USER PROFILE for turning on the toggle

feature, page X).

NOTE If you turn on HR zone, the watch displays Above Zone for 3 seconds when your

particular heart rate is above the zone; or displays Below Zone for 3 seconds when your

particular heart rate is below the zone.

NOTE If the total number of laps and records reaches the 100th or the total

hours of the exercise reaches 80 hours, memory full displays on the screen

with a long beep. You need to clear the memory for further exercise purpose.

(Please refer to page X for details.)

NOTE Bike pod low batt. displays on the screen if the watch estimates the

bike pod is low battery.