User's Manual

The watch can also pair with other chest belts and devices

such as foot pod and bike pod that use the ANT Sports

System. However, other chest belts can only allow pairing

of heart rate function.

1. Press

MODE repeatedly to select . The watch

will show how many and which devices are paired

(if any). If no device is paired, the watch will show “

DEVICE PAIRED”.

2. Press

SET to enter “PAIR DEVICE”. Press SET to start

pairing.

PAIR WITH SZ909 CHEST BELT (OR OTHER

ANT-SYSTEM CHEST BELTS)

You have 2 ways to pair the watch with chest belt.

• One way is to strap the belt across your chest, and wait

until the watch displays

and

(only with SZ909)

• The other way is as follows:

i. Hold the chest belt ﬁrmly with your thumbs touching

the conductive pads that normally contact your

chest.

ii. Rub your thumbs back and forth across the

conductive pads a few times until the watch displays

the screens above.

NOTE Only with SZ909 chest belt can you pair both HR belt

and foot pod. If you pair with other ANT-system chest belt,

only HR belt can be found.

NOTE For SZ909 chest belt, pairing is only considered

successful when both HR belt and foot pod are found.

PAIR WITH ANT-SYSTEM FOOT POD / BIKE POD

You can purchase foot pod or bike pod separately to pair

with your watch, as long as they use the ANT system. For

information on pairing, refer to their User Guides.

• When the foot pod is paired successfully, the watch will

display