User's Manual

SET DUAL ALARM

1. Press ((.)).

2. Press and hold ((.)) again for 2 seconds. The Alarm

settings will blink.

3. Select the hour and minute. Press UP or DOWN to

change settings. Press ((.)) to confirm.

To set second alarm perform step 1 twice,

then perform steps 2 and 3.

ACTIVATE ALARM

Press ALARM ON / OFF to activate, deactivate and toggle

between alarm settings. (Alarm symbol with #1 or #2)

shows in Calendar / Alarm Area when alarm(s) are

activated.

TEMPERATURE

This product can display the following temperature

information:

• Current, minimum and maximum readings

• Trend line for remote sensor

Data is collected by the remote sensors and displayed

every 30 seconds.

SELECT TEMPERATURE UNIT

Slide the °C / °F switch into the desired location. The

switch is located on the back of the product.

SELECT SENSOR CHANNEL

Press CHANNEL to switch between sensors 1 - 3.

The icon shows the selected sensor.

ALARM

This product is equipped with a 2-minute crescendo alarm.

VIEW ALARM SETTINGS

The Alarm Time and On / Off status will show in the

Calendar / Alarm Area.

Press ((.)) again for the second alarm time and status.

NOTE

Designated

Display

Remote

Display

Channel 1

Kineticwave

Icon

Remote

Display

Channel 2

Remote

Display

Channel 3