User's Manual

EN
14
Check this: Electromagnetic interference or objects are
barring reception. Orientation or placement
of main unit is not optimum for receiving
the RF signal.
Remedy: Place the main unit far away from PCs,
phones, and other electronic equipment.
Problem: No alarm.
Symptom: Alarm does not sound.
Check this: Alarm is disabled.
Remedy: Turn on the alarm setting.
Problem: Operation is not normal.
Symptom: Certain functions do not perform.
Check this: Device requires reset.
Remedy: Reset the unit with a blunt stylus pressed
against the Reset hole.
SPECIFICATIONS
Width x Height x Depth:1.73 x 5.55 x 3.46 inches
(44 x 141 x 88 mm)
Weight: 0.32 lbs (146g) (without batteries)
TROUBLESHOOTING GUIDE
BASIC FUNCTIONS
This section includes a list of frequently asked questions
for problems you may encounter. If your device is not
operating as you think it should, check here before
arranging for servicing.
Problem: Radio antenna is not displayed on the
LCD screen.
Symptom: The atomic clock signal cannot be received.
Check this: Obstacles (either electromagnetic
interference or objects) are barring the
signal from reaching the main unit.
Remedy: Move the unit away from any sources of
interference, including other electronic
devices.
Problem: Low-battery signal is displayed on the
LCD screen.
Symptom: Batteries of the unit are low.
Check this: Check LCD display of the unit.
Remedy: Install new batteries into the unit.
Problem: Clock time is not correctly set.
Symptom: No atomic clock signal reception.
RM818PA English R1 9/1/04, 11:20 AM14