User's Manual

To turn on the projector:

Press the SNOOZE button to activate the projector

for 5 seconds.

If the AC / DC adaptor is plugged, press the

PROJECTOR ON and the projector will stay

continuously on. Press the PROJECTOR ON button

again to deactivate the continuous projection-on function.

ANIMATION SPEED SETTING

To enter to the projector setting mode:

1. Press the PROJECTOR ON button for 2 seconds.

2. Use the UP and DOWN buttons to select either fast

or slow animation.

3. Press the PROJECTION ON button to confirm.

The order of the flashing items is speed

high / slow, alarm animation on / off, exit project setting

mode.

ANIMATION ON / OFF SETTING

To set the animation on:

1. Press and hold the PROJECTION ON button for

2 seconds.

2. Select the animation speed by using the UP and

DOWN buttons.

3. Press the PROJECTION ON button

4. Use the UP and DOWN buttons to select "On" or

"Off".

5. Press the PROJECTION ON button to confirm.

THE PROJECTOR FUNCTION

ACTIVATING THE PROJECTOR

NOTE

RM818PA English R1 9/1/04, 11:20 AM12