Cool Atomic Projection Clock with Animated Projection Model : RM818PA User Manual RM818PA English Cover R1 1 8/31/04, 10:48 PM
The Snooze Function ............................................. 11 Introduction .............................................................. 2 The Projector Function .......................................... 12 Key Features ............................................................ 2 Activating the Projector ........................................ 12 Front View .............................................................. 3 Animation Speed Setting .....................................
EN INTRODUCTION KEY FEATURES Thank you for selecting the Oregon Scientific TM RM818PA Cool Atomic Projection Clock with Animated Projection as your product of choice. The desktop dual-band radio-controlled clock with animated time projection features: 1. Atomic clock function. 2. Time, alarm status and animation projection on your wall or ceiling. This device is designed to give you many years of reliable service, including the following conveniences: 3.
EN FRONT VIEW The Cool Atomic Projection Clock with Animated Projection features: 1 1. Projection Unit • The projector can swivel 180 degrees back and to the front. 2. Main LCD Display 4 • Displays current time, date and atomic clock signal reception indicator 3. SNOOZE / LIGHT button • 5 2 Press to activate projection and backlight for 5 seconds. 4. ALARM button • 6 5. • Press to toggle between Alarm 1, Alarm 2 and Calendar mode.
EN BACK VIEW 1. Battery compartment • The unit uses 2 AAA / UM-4 1.5V batteries for power. 2. Adaptor slot 3. Reset hole • Returns all settings to default values. 4. UP button • Press and hold for 2 seconds to enable and start the Atomic clock function when in normal mode. • Press to increase the flashing item by 1 in Setting mode. 5. DOWN button • Press and hold for 2 seconds to disable the atomic clock function when in normal mode. • Press to decrease the flashing item by 1 in Setting mode.
EN LCD DISPLAY SYMBOLS SAFETY & CARE INSTRUCTIONS SAFETY PRECAUTIONS 1 Please observe the following safety precautions when setting up and using this product. • LCD panel - The LCD panel is made of glass, and may break if the unit is dropped. 6 2 • Heat sources - Keep the product away from heat sources, such as radiators, stoves, heaters, and other heat - generating products. 7 • Water and moisture - Do not use the product in or near water or in high moisture areas, such as a bathroom.
EN 1. Locate the battery compartment. • Do not scratch hard objects against the LCD display as this may cause damage. 2. Install the batteries by matching the correct polarity. Always use the correct battery type (2 x UM-4 AAA-sized 1.5V batteries). GETTING STARTED WARNING Reversing the polarity may damage the product. UNPACKING THE PRODUCT When you unpack your product, make sure to keep all the packing materials in a safe place, in case you need to later transport or return it for servicing.
EN ADAPTOR ATOMIC CLOCK By plugging in the adaptor, the projector will project the time on the wall or ceiling continuously. This product is designed to synchronize its calendar clock automatically with the U.S. atomic clock in Boulder, Colorado, once it is brought within range of the radio signal. NOTE When the unit is receiving the signal, the atomic clock signal reception icon will start to blink Generally, complete reception takes around 2 to 10 minutes, depending on the strength of the signal.
EN Even though there are areas that may have more difficulty in receiving a signal, the atomic clock contains accurate quartz movement and will retain precise timing if the signal is missed on a rare occasion. To set the clock manually therefore: 1. Press and hold the DOWN button for 2 seconds until the atomic clock reception signal disappears. 2. Press and hold the CLOCK button to enter the clocksetting mode. Then use the UP or DOWN button to adjust the value of each setting.
TIME FORMAT SETTING MODE 3. Press the CLOCK button once more to set the minutes. (Use the UP and DOWN buttons to adjust the minutes). To set the current date: 1. Press and hold the CLOCK button for 2 seconds. 2. Press CLOCK four more times. MINUTE-SETTING MODE 3. Use the UP and DOWN buttons to select the year. 4. Press the ALARM button to exit the set mode. 4. Press the CLOCK button to set the date format by using the UP and DOWN buttons. To select the time zone: 5.
EN To choose a language: NOTE If you do not press any button, the alarm will automatically stop ringing after 2 minutes. 1. Press and hold the CLOCK button for 2 seconds. 2. Press CLOCK eight times. DISPLAYING THE ALARM TIME 3. Use the UP and DOWN buttons to select the language. By default, the unit's LCD screen displays the current date and month. 4. Press the CLOCK button once more to exit the set mode. To display the alarm time instead: LANGUAGE SETTING MODE Press the ALARM button.
NOTE You will see the bell icon appear beside the date on the lower half of the LCD display. The first bell will turn on the alarm for Alarm #1. If you press the ON / OFF button a second time, you will activate the second alarm as well (as shown by the appearance of the second bell icon beside the date but below the bell icon for the first alarm). 1. Press and hold the ALARM button for 2 seconds. 2. Adjust the hour of the alarm time by using the UP and DOWN buttons. 3.
EN THE PROJECTOR FUNCTION ACTIVATING THE PROJECTOR NOTE The order of the flashing items is speed high / slow, alarm animation on / off, exit project setting mode. ANIMATION ON / OFF SETTING To turn on the projector: To set the animation on: Press the SNOOZE button to activate the projector for 5 seconds. 1. Press and hold the PROJECTION ON button for 2 seconds. NOTE If the AC / DC adaptor is plugged, press the PROJECTOR ON and the projector will stay continuously on.
The light on the vibration device will flash in red when the battery is low, and the light will flash in green when the battery power is full. The switch within the vibrating device can adjust to alarm 1 or alarm 2, or both. Simply select the alarm time when you want the device to wake you up. NOTE The animation feature will move the image of the time, alarm on/off status and alarm time in a cascading and random motion, which is pleasant to the eye. NOTE The vibrating device is powered by two "AA" 1.
EN Check this: Electromagnetic interference or objects are barring reception. Orientation or placement of main unit is not optimum for receiving the RF signal. TROUBLESHOOTING GUIDE BASIC FUNCTIONS This section includes a list of frequently asked questions for problems you may encounter. If your device is not operating as you think it should, check here before arranging for servicing. Remedy: Place the main unit far away from PCs, phones, and other electronic equipment. Problem: No alarm.
• Take precautions when handling all battery types. They can cause injuries, burns, or property damage as a result of contact with conducting materials, heat, corrosive materials or explosives. Remove the batteries before storing the product for long periods of time. WWVB-60 Display: HOUR FORMAT 12HR AM / PM OR 24HR • The product is a precision instrument. Never attempt to take this device apart. There is a serious danger of powerful electric shocks.
EN ABOUT OREGON SCIENTIFIC FCC STATEMENT Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products such as digital cameras; MP3 players; children's electronic learning products and games; projection clocks; health and fitness gear; weather stations; and digital and conference phones. The website also includes contact information for our customer care department in case you need to reach us, as well as frequently asked questions and customer downloads.
Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. Address: Block C, 9/F, Kaiser Estate, Phase 1,41 Man Yue St., Hung Hom, Kowloon, Hong Kong is in conformity with Part 15 of the FCC Rules.
© 2004 Oregon Scientific. All rights Reserved. P/N.
