BLE connected IN/out thermo-hygrometer with clock Model: RAR213HG USER MANUAL
EN Specifications---------------------------------------------------------------8 BLE connected IN/out thermo-hygrometer with clock About Oregon Scientific-------------------------------------------------8 Model: RAR213HG EU-Declaration of conformity-----------------------------------------9 USER MANUAL FCC & IC statement-------------------------------------------------------9 Contents Introduction-----------------------------------------------------------------3 Overview-----------------------------
EN introduction Thank you for selecting our Oregon ScientificTM Weather@Home Thermo Plus Bluetooth-enabled Thermo-Hygro Monitor, which has changeable display on indoor and outdoor temperatures and humidity. NOTE Please keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know about. OVERVIEW FRONT VIEW 1. Outdoor channel selected 2. : remote sensor reception indicator 3.
EN REMOTE SENSOR (THGN132N) 15. Indoor humidity reading (current / MAX / MIN) 16. Outdoor temperature reading (current / MAX / MIN) 2 REAR VIEW 1 3 4 5 1. LED status indicator 2. Wall mount hole 3. Battery compartment 4. RESET hole 5. CHANNEL switch R ESE T C0 F USEFUL REFERENCE Other supported sensors include the following models: THGN132N, THN132N, THGN328N, THGR328N, BTHGN129, THN318N GETTING STARTED INSERT BATTERIES 1. RESET: reset the unit to default settings 1.
EN LOCATION NOTE Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing. MEANING Clock area Main unit batteries low Outdoor temperature area Sensor batteries low SENSOR DATA TRANSMISSION REMOTE SENSOR To search for a sensor: The main unit can collect data from up to 5 sensors. • To set up the sensor: 1. Open the battery compartment. Press and hold 2 seconds.
EN CLOCK To auto-scan among sensors: MANUALLY SET CLOCK 1. Press and hold and MEM at a time for 2 seconds to enable auto-scan function for all 5 channels. The temperature will be displayed automatically in sequential order for 3 seconds each. 1. Press and hold MODE for 2 seconds to enter the setting mode. 2. The settings order is: 12/24 hour format, hour, minute, year, calendar format (day-month / month-day), month, day and language. 3. Press or 2.
EN PAIRING YOUR WEATHER STATION NOTE As ice alert is only applicable to channel 1, to prevent flashing of LED, select other channels on outdoor sensor. First of all, you need to pair your weather station with your mobile device. will flash on the screen of the weather station while pairing and be on after successful pairing. BACKLIGHT Press LIGHT to activate backlight for 5 seconds. RESET • Open the battery compartment. • Press RESET to return to the default settings by a pin or the top of a pen.
EN • • 5. Tap on each channel to rename it. (Up to 20 characters including space are allowed). Tap to exit. if completed. Tap Automatically sync time Show sea level pressure (not available in RAR213HG) To remove sensor: To remove any sensor from the weather station, Tap Remove station on STATION screen, all the sensors will be removed at the same time. To reposition the sensors on screen: 1. On STATION screen, tap . at the 2. Press and hold right side of a sensor. Drag it to your desired position.
EN VIEW CURRENT READINGS To automatically synchronize time: Time and date on your weather station could be automatically synchronized by your mobile device. You can directly view all the weather readings from different sensors through the application at a time. The readings are in HOME screen. • NOTE If low battery icon displays on the screen, please replace the batteries for the corresponding device.
EN OPTIONAL SENSOR FOR ADDITIONAL INFORMATIONINFORMATION • When disposing of this product, ensure it is collected separately for special treatment and not as household waste. By applying the optional sensor (Model: BTH Sensor) at a time, you can also view the following information using your mobile device. • Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible.
EN SPECIFICATIONS TYPE For any enquiry, please contact our Customer Services at info@oregonscientific.com. DESCRIPTION Oregon Scientific Global Distribution Limited reserves the right to interpret and construe any contents, terms and provisions in this user manual and to amend it, at its sole discretion at any time without prior notice. To the extent that there is any inconsistency between the English version and any other language versions, the English version shall prevail. MAIN UNIT LxWxH 135.
EN FCC & IC STATEMENT Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Consult the dealer or an experienced radio / TV technician for help.
