User's Manual

ManualsBrandsIDT Technology ManualsElectronicsThe Find One Find All Keyfinder

ET136

Find One Find All™ Keyfinder

RadioShack

Congratulations on the purchase of your FOFA™ keyfinder. Your FOFA is a keyfinder system

that can be expanded up to 36 unique FOFA units. You attach them to objects that are easily

lost. If you can find one FOFA, you can find them all!

OVERVIEW

Each FOFA unit can find any other FOFA unit in a range up to 30 feet. FOFA keyfinders are

sold in pairs. Each FOFA unit belongs to a Set that you define. You can have up to 6 unique

Sets of 6 FOFA Items for a total of 36 unique FOFA units. Your FOFA units come with plastic

stickers for customizing the buttons of each FOFA.

USING FOFA FOR THE FIRST TIME

Before you can begin using your FOFA, you must install the batteries and set each unit.

INSTALLING OR REPLACING THE BATTERY

Each FOFA needs one CR2032 battery (supplied). When the FOFA stops working properly,

replace the battery. Follow these steps to install/replace the battery:

1. Pull out the battery tray and take out the old battery (if present).

Place the new battery on the tray with + face up.

3. Push in the battery tray.

When the FOFA beeps and the LED begins to flash, you will need to set FOFA’s Identity

(See “Setting FOFA”). If you don’t set it in time before the flashing stops, you can re-enter the

set-up mode by pressing any key on the keypad (Also see “Setting FOFA”).

CAUTIONS:

1. Use only fresh batteries of required size and recommended type.

If you do not want to use the FOFA for a month or more, remove the battery.

WARNING: Dispose of the old battery promptly and properly. Do not burn or bury it.

QUICK SETUP

Many first-time FOFA owners set their first FOFA pair to

Set 1, Item 1

and

Set 1, Item 2

respectively. To do this, immediately after installing the battery, press “1”, then ”1” again on the

first FOFA and press “1”, then “2” on the second FOFA For more details, see “Setting FOFA”.

IMPORTANT: FOFA’s only locate other FOFA’s within their Set number; (the first number you

enter when setting) however, you can easily re-program your FOFA to find units in other sets at

any time. .

SETTING FOFA

You can set FOFA to your desired Set (Set 1, Set 2…Set 6) and Item (up to 6 items). Follow

these steps to set FOFA:

1. If you have just installed the battery, FOFA goes into setup mode immediately without having

Summary of content (4 pages)

PAGE 1
ET136 Find One Find All™ Keyfinder RadioShack Congratulations on the purchase of your FOFA™ keyfinder. Your FOFA is a keyfinder system that can be expanded up to 36 unique FOFA units. You attach them to objects that are easily lost. If you can find one FOFA, you can find them all! OVERVIEW Each FOFA unit can find any other FOFA unit in a range up to 30 feet. FOFA keyfinders are sold in pairs. Each FOFA unit belongs to a Set that you define.
PAGE 2
to press any keys (I.e. proceed to Step 2). To enter Setup mode at any other time, press and hold the 1 and 3 keys at the same time until the FOFA unit has beeped and flashed 4 times. The LED will begin flashing slowly. 2. Press one number key on the FOFA unit to define the Set number. The LED will begin flashing quickly. 3. Press another number key on the FOFA unit to define the Item number. The LED stops flashing. 4. The new identity setting is then read back to you by the FOFA unit.
PAGE 3
Assign objects of the same type (i.e. TV remotes or cordless phones) to the same Set number. Set # 1 1 2 2 3 4 Item # 1 2 1 2 1-6 1 Suggested Use Dad’s Keys Dad’s Wallet Mom’s keys Mom’s purse All remotes Medical appliance (i.e. nebulizer, glucometer, etc.) CARE and MAINTENANCE Keep the FOFA dry; if it gets wet, wipe it dry immediately. Use and store the FOFA only in normal temperature environments. Handle the FOFA carefully; do not drop it.
PAGE 4
FCC INFORMATION 1. Labelling Content FCC ID: NMTET136 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation 2. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 3.