§ GH BMI BODY WEIGHT MONITOR MODEL : BWRI102 USER'S MANUAL ADJUST THE SETTING OF THE REMOTE DISPLAY UNIT 1. enter the setting mode. OD set the display format eho o24h set the hou. set the minute. Cea Lal 5. set the year. set the date-month format. Cee) set the month. 0) Cub : . set the date.
GB 9. set the format of the © ®) A, measurement unit. oo DRY ACQUIRE WEIGHT FROM SCALE select the display unit on scale. © . step on the scale. w . stand still til reading is displayed. Notes Beep sound to indicate end of measurement. = step off the scale. Note: Repeat steps 2 3 for next measurement.
STORE WEIGHT TO REMOTE DISPLAY 1. take measurement from scale Beep sound indicates the activation of receiving mode. Receiving function will be activated for 30 sec. 3. weight received from scale Note: Beep sound to indicate signal is being received from the scale Hf height iz not set, m= __T BMI will tot be displayed. refer LEN 2. activate receiving mode. Bhi “I = . select the user. e393 . stare the weight. @ o> Note: Beep sand fo indicate the weight is stored to memory.
GB USER SETTING / MEMORY RECALL FROM THE REMOTE DISPLAY UNIT Ta. select the user. om CES Noe m3 11 height is not input, nn it will not be displayed. ERR 1b. quit user mode, recall memory. @ Rem ® 00/0 © @ roof 2b.
FITS A. install the batteries into the unit. B. When batteries are first installed on both the scale and remote display unit. B-1. acquire the weight on the scale. R-2. match the remote display unit with the scale. Note: (mom a) beep sound indicates that the matching is activated. b) check the reading on the scale and the remote display unit . cy if this fails, repeat step B-1 & B-2. B.3. set the clock a after changing batteries of the scale, repeat steps B-1 & B-2. D.
| GB WHAT IS BODY MASS INDEX (BMI) ? Body Mass index (BMI) is a measurement of your body height to weight ratio. BMI is un international standard that is used for evaluating obesity. It is expressed as your body weight in kilograms divided by the square of your body height in meters. BMI = body weight (kg) {body height (ml It can be used as an indication 1 estimate whether you are overweight or underweight.
TROUBLE SHOOTING Symptom Description Action 1 incorrect use or weight step off the scale and measurement is not stable. repeat the measurement. 2 y 1 scale overloaded. check whether an excessive mass fs put | on the scale and then repeat the measurement, 3 = no height data is imputed for check the height and repeat the BMT or BMI is out of range. measurement a NOTES FOR THE USER A. maximum capacity: 150 kg / 330 Ib / 23at8lly B. graduation: height input range © 94.0 240.0 em / 31.07 T1057 D.
GR 1. de not load the scale when not in use J. avoid on wet surfaces K. avoid [rom abrasive or corrosive cleaning agent NOTE ON COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, nnd (2) This device must accept any interference received, including interference that may cause undesired operations.
NOTE FOR THE USER Please read the manual carefully before use. * The scale will calibrate automatically to provide accurate measurement when the lease is placed on the ground. Message: [ERE]. BBE] win be dispirited on the scale o indicate th calibration is in process. Normally t wil tke 2-3 convulse only. Please Eave the scale alone wham you see such message.