User's Manual

EN
14
Power
Power supply
3V DC, 2 LR03 / AAA / UM4-size
1.5V batteries
Power save
Auto power off after 1 minute of
non-activity
Operating environment
Operation
50°F to 104°F (10°C to 40°C)
Storage / Transport
-4°F to 140°F (-20°C to 60°C)
Humidity range
10% to 83% relative humidity
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientic.com) to learn more
about Oregon Scientic products.
If you’re in the US and would like to contact our Customer
Care department directly, please visit:
https://us.oregonscientic.com/service/support.asp
For international inquiries, please visit:
http://us.oregonscientic.com/about/international.asp
INFORMATION ABOUT THE CE MARK
This device complies with the European regulations based
on the Medical Products Code, and bears the CE mark
“CE0120”. The device has been quality inspected according
to EU guideline 93/42/EEC and tested in compliance to
the “EN1060-1 Non-invasive sphygmomanometers - Part
1, General requirements” and “EN1060-3 Non-invasive
sphygmomanometers-Part3: Supplementary requirements
for electromechanical blood pressure measuring systems”.
The CE mark further indicates that this blood pressure
monitor meets the general requirements for electronic
products as regards to resistance to electromagnetic
interference. Malfunctioning may however occur in the
proximity of extremely strong electromagnetic elds. In
accordance with the “Ordinance for Operators of Medical
Products”, a technical inspection must be carried out if this
device is used for industrial or commercial purposes.
SYMBOL DESCRIPTION(S)
Type B Equipment
Reference
Enterprise Production Guangdong Food and Drug
License No. Monitoring Machinery
Production License No.
20010422
Standard Registration YZB/ Guangdong 0108-2008
Serial No.
Standard Enterprise Q/SZK 01-2006
Serial No.
BLOOD PRESSURE LOG BOOK
To create a log of your blood pressure history, complete the
personal information section at the top, then enter the details
(date, time, and measurements) for each reading you take.
To plot your history, use an S (systolic), D (diastolic) and
M (mean arterial pressure) to mark the points where each
measurement falls on the chart, then connect the points to
view your history over time
Protected by US. Patent no. 7,211,047
BPW800_EN_R8.indd 14 2011/6/8 7:07:12 PM