User's Manual

new measurement is assigned to the first (1)
entry in the user record selected. All other
records are pushed back one digit (e.g., 2
becomes 3 and so on), and the last record (100)
is dropped from the list.
For average morning / evening blood pressure
readings to be displayed, blood pressure has to
measure for three consecutive days at least twice
in each time period (morning / evening).
For ease of reference, the date and time when
the measurement was taken is shown with each
record.
Memory is kept even when the batteries become
exhausted and subsequently replaced.
RECALLING MEASUREMENTS STORED IN
MEMORY
Ensure the monitor is off.
Select user:
 Press to view a history of User 1’s
records
 Press to view a history of User 2’s
records
View more records for the same user:
 Press the corresponding user button
repeatedly ( or ) to see additional
records (average morning / evening if
available or next record).
TIP Press and hold corresponding user button
( or ) to quickly toggle through all the
entries.
To alternate between different user’s records:
Press or .
CLEAR RECORDS
When memory is full, flashes.
Apart from deleting an entire measurement
history, there is also an option to delete the latest
measurement record. This is useful if
measurements have not been accurately
recorded and need to be recorded again.
DELETING A SINGLE RECORD
1. When monitor is off, press or to
select user.
2. Press the corresponding user button
repeatedly ( or ) to navigate to the
record to be deleted.
The most recent record (1) is shown first.
3. Press and hold . dEL ONE displays and
flashes.
 Press to exit to the deletion mode.
 Press and hold again to confirm
deletion.
4. doNE dEL indicates the record has been
deleted.
DELETING ALL RECORDS
1. When monitor is off, press or to
select user.