User's Manual

6. Error messages on your blood pressure monitor
When you use your blood pressure monitor, it might display an error message to
indicate that a problem occurred.
The following table provides explanations of the error messages that you might
see on your blood pressure monitor and what you can do to try to resolve the
problem. If you cannot resolve a problem, contact your care provider.
Message Description
EC02
The blood pressure monitor could not detect a stable
pressure signal. Try again
EC04 The cuff did not deflate properly. Try again
F.03D.601.424 Rev. A 12/2012 | Robert Bosch Healthcare Systems, Inc.
en | 12