User's Manual

IDS Ingegneria Dei Sistemi S.p.A.
N doc.: MN/2011/067 – Rev. 1.0
23 / 29
5.2 Connecting the DAD Control Unit - Notebook Computer
The following describes how to cable the DAD Control Unit to the Notebook
Computer
 Use the Lan Cable (Fig. 5.2) to connect the DAD Control Unit and the
Notebook Computer as shown in (Fig. 5.3)
Fig. 5.2 – Lan Cable
Fig. 5.3 – Lan Cable connection between the Notebook Computer and the DAD
Control Unit
 Connect the DAD Control Unit to the Battery using the Battery Cable
(Fig. 5.4) as shown in (Fig. 5.5)