User Manual

16/ 22
Fig. 1.3 – Stream X sledge kit
Fig. 1.4 – Antenna positioning
!
NOTE
Notice that antenna connectors are placed to be aligned with the arm in
the external side of the “cross”. This positioning must be done to
respect the standard configuration file of IDS acquisition software.
Put the motor rack over the hook linked to the vehicle with the automatic locking system
(Fig. 1.5). Unscrew the supports until they touch the vehicle and modify their extension
until the frame reaches approximately 90° with the ground level. Stabilize the frame
applying straps. Link the remote to the remote connector and the crocodile battery cable
to the bigger car battery supplied with the system (Red goes with +, Black goes with -).
This will let you activate the motor rack: place the moving frame in the lowest position.
Joints
Fixing
screws
External arm