User Manual

15/ 22
1.1 Assembly procedure of the System
In the following chapters the procedure to assemble the mechanical kit of Stream-
X will be explained. This procedure shows the assembling of the 200 MHz system
(AR200-V8 antennas). The 600 MHz antenna only difference is the use of the
AR600-V12 antenna model.
Fig. 1.2 – 600 MHz array (AR600-V12 model)
The black sledge is composed of two modules: link them with the white joints and
fix the structure with the dedicated screws (Fig. 1.3). Insert the antenna modules in
place and fix them with the elastic bands as shown in Fig. 1.4.