User's Guide

Mod: MDM/011/M4 Rev 2
IDS GeoRadar User Guide QGG/2020/002 Rev. 1.1
5 Switching the system ON/OFF
1. Switch ON the CU by pressing Power button located on the right edge of bottom side of the CU for 2-3
seconds, until it is possible to observe CONTROL UNIT LED blinking (1s). Turn OFF the CU by pressing the
power button (for 6-7 seconds) until the CONTROL UNIT LED turns OFF.
2. The user can access to RockSpot Controller SW running in the embedded PC through the tablet (optional).
The connection between the tablet and the embedded PC is through Wi-Fi: connect the tablet to
“RockSpotWIFI network” (password: rockspot1234). Connect to the industrial PC (10.0.0.101) using the tablet
via Remote Desktop:
User = ROCKSPOT\user; Password = rockspot1234
2
1