User's Guide

Mod: MDM/011/M4 Rev 2

IDS GeoRadar User Guide QGG/2020/002 Rev. 1.1

3. Connect the SU to the CU by the designated cable (Error! Reference source not found.)

4. Connect the CU to the SU by inserting the dedicated cable (Error! Reference source not found.) in the

connector ( SU1 red arrow); do not connect the survey unit to the connector (SU2).

In order to supply the CU, connect the designated cable (Error! Reference source not found., Error! Reference

source not found.) to the Power Connector (green arrow) an then to an external stabilized power source

AC: 110VAC, 4.6A÷240 VAC, 2.3A or 12÷24 VDC, 20A (480W at least) input.