User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N doc: MN/2009/071 - Rev. 1.1
IBIS-S v. 1.0 - User Manual
Config.: IBIS-S-PRCS-OUT-MN
39 / 48
All information contained in this document is property of IDS. All rights reserved.
Fig. 5.15 – Remove the protection caps
27. Retrieve one of the batteries from the case.
28. Connect the power supply cable to the IBIS-S sensor then to the battery.
Fig. 5.16 – Connecting the sensor to the battery
29. Place the PC near the sensor (during operation we recommend using a portable
table to sit the PC on).
30. Connect the PC to the second battery using the car transformer.
31. Start up the PC and log in as administrator.
32. Connect the USB cable to the IBIS-S sensor and then to the PC;