User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N°doc: MN/2009/070 - Rev. 1.1
IBIS-L v.02.00 - User manual
43 / 65
All information contained in this document is property of IDS. All rights reserved.
1. ay the case on a flat surface, open the six clasps and remove the cover;
Fig. 4.1 - Opened IBIS-L box
2. remove the template from the case, lifting it by the two black handles;
3. unscrew the three wing nuts that fix the track and remove the washers (Fig. 4.2);
4. remove the track using the handles at each end;
Fig. 4.2 – wing nuts fixing the linear scanner
5. the pointing system is now visible inside the box, the DEM spacers and the template
spacer (Fig. 4.3 );
DEM
elements
Linear
scanner
Elevation
pointing
system
Templat
Spacer