User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N°doc: MN/2009/070 - Rev. 1.1
IBIS-L v.02.00 - User manual
39 / 65
All information contained in this document is property of IDS. All rights reserved.
3. Use an insulated tool to move
the switch and select the correct
input voltage value.
4. Verify that the label on the
transformer indicates the desired
voltage. Voltage can be set to
230 V or 115 V.
Tab. 3.4 – Procedure for setting the voltage.
3.6 Control and acquisition PC
The IBIS-L system uses a notebook PC, model PANASONIC CF-19 (Fig. 3.25 ) to
control the sensor. The PC is supplied with windows XP and the IBIS-L Controller v.
02.00.002 control and data acquisition software pre-installed.