User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N°doc: MN/2009/070 - Rev. 1.1
IBIS-L v.02.00 - User manual
24 / 65
All information contained in this document is property of IDS. All rights reserved.
1 power supply cable to connect the
power supply module to the IBIS-L
sensor (3m)
1 IBIS-L Manual;
1 IBIS-L Controller Manual
6 spherical thrust bearings (each bearing
consisting of two parts)
6 disc springs
3 long M16 threaded studs each with
two nuts and 2 washers
2 short threaded M16 studs each with 2
nuts and 2 washers
3 base washers with M16 hole
Positioning fork complete with:
• M8Anti-veering screw (right);
• M8 nut and M8 washer for anti-
veering screws;