User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N doc: MN/2009/071 - Rev. 1.1
IBIS-S v. 1.0 - User Manual
38 / 48
A
ll information contained in this document is property of IDS. All rights reserved.
Fig. 5.13 – Mounting the antennas
25. Acting on the two handles that block the azimuth and elevation axes, rotate the
sensor until the optical telescope is pointing to the desired point of the scenario;
Fig. 5.14 – Pointing the sensor
26. Remove the protection caps covering the connectors on the back of the IBIS-S
sensor;