User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N doc: MN/2009/071 - Rev. 1.1
IBIS-S v. 1.0 - User Manual
36 / 48
A
ll information contained in this document is property of IDS. All rights reserved.
Fig. 5.9 – Metallic nut
16. Position the hexagon so that one side of the hexagon is parallel with the long
side of the IBIS-S head base, then block the hexagon using the tightening nut
(Fig. 5.10);
Fig. 5.10 – Tightening nut
17. Lift the sensor with the antenna side pointing forward.
18. Position yourself with the sensor behind the tripod on the side with the elevation
control handle.
19. Lift the sensor over the tripod and slowly lower it making sure that the hexagon
is positioned above the quick locking mechanism on the triaxial head.
20. Fix the sensor onto the tripod, ensuring the locking mechanism clicks into place.